Construction Chemicals Manufacturers &
                                          Waterproofing Contractors
COME TO CONTECH AND YOU HAVE COME ALL THE WAY TO UNPARALLELED PROTECTION
COME TO CONTECH AND YOU HAVE COME ALL THE WAY TO UNPARALLELED PROTECTION
CONCRETE ADMIXTURE

  • CONFIBER
  • CONFLOW
  • CONFLOW-S
  • CONFLOW-CP
  • HYDROCEM
  • KRETE-X
CONFIBER (A solution for concrete reinforcement)

CONFIBER is a polypropylene based fiber specifically designed for the reinforcement of cementitious mortars and concrete mixes and can be easily incorporated in the concrete mix.

CONFLOW (Concrete Plasticizer)

It is a lignin based Plasticizer cum waterproofer for concrete, which reduces the requirement of water in concrete mix, thus makes the concrete dense, flowable, less honeycomb and increases its strength up to 25%. Useful in heavily reinforced concrete and water retaining structures. Conflow is tested as per IS standard


ADVANTAGES OF USING CONFLOW

  • Reduce bleeding
  • Increase workability
  • More Cohesive Concrete
  • Improves Concrete Finishing
  • Higher Strength Achieves
  • Reduces Corrosion of reinforcement in concrete
  • Increases Steel Concrete bond strength
  • Chloride free
  • Increases water tightness
  • No Plastic Shrinkage
  • Denses Concrete without honeycombing
CONFLOW-S (Concrete Super Plasticizer Naphthalene Based)


It is a Naphthalene based Super Plasticizer for cement, which reduces the requirement of water upto 30% without affecting the setting time in concrete mix. It makes the concrete dense, flowable, pumpable less honeycomb and increases its strength up to 25%. Useful in heavily reinforced concrete & water retaining structures. It is chloride and nitrate free. Also available in retarding grade

CONFLOW-CP (Concrete Super Plasticizer Polycarboxylic ether)


CONFLOW-CP is a polycarboxylate based advanced superplasticizer for use in cementitious systems, particularly "low" or "no" slump mixtures. CONFLOW-CP imparts excellent workability and slump control in concrete and flow control in mortars. These beneficial properties are maintained over extended periods of time compared to conventional plasticizers, such as sulfonated naphthalene/melamine formaldehyde condensates, where flow properties and workability tend to deteriorate significantly over time.

HYDROCHEM (Pozzolinic Admixture for Concrete)

Hydrocem (Micro silica) is a highly reactive Metakaolin mineral additive in powder form to make durable concrete with higher compressive strength and low permeability having better finish. Blending with Portland cement, Hydrocem improves the pro perties of Concrete and Cement products considerably by:


  • Increasing Compressive & Flexural strength.
  • Providing resistance to chemical attack.
  • Reducing permeability substantially.
  • Preventing Alkali-Silica Reaction.
  • Reducing efflorescence & shrinkage.
  • Protecting corrosion.

Hydrocem is used in preparing High Performance, High Strength and Lightweight concrete in Industrial / Commercial floor, Marine concrete, Precast Concrete, Shotcreting, Ferro cement products, Glass Fiber Reinforced Concrete, Mortars, stuccos, Repair Material, Pool Plasters etc.

KRETE-X (Concrete Accelerating Admixture)


It is an accelerating agent for cement. Used as an integral floor hardener as well as for early form removal and foundation concreting. It is also used for repairing concrete floors. Krete-X produces a tough Non shrink waterproof concrete with high early & ultimate compressive strength.