It is a rust Convertor. Applied on the rusted iron surface it converts rust into a grayish black anticorrosive primer, ready for final painting. This primer protects the metal from further rusting. Rustrip is recommended for use on all rusted iron, steel surface, reinforcement bars, steel structure in chemical plant and marine area as well as in commercial building.
Rustcure is a single component polymer based anticorrosive paint specially prepared for steel bars
used in the construction industry. The film obtained from Rustcure is tough, flexible and have high tensile as well as flexural
properties. It bonds tightly with steel surface and never peel off. It has good impermeability as well as chemical resistance
properties also. Rustcure films protects steel from rusting, scale formation etc.
that occurs due to humidity, saline-rain water, acidic fume etc.
Rustcure is supplied in Polymer based liquid form and is mixed with cement at site in the required proportion. The prepared paint is applied with a brush on the reinforcement
bars.
EPICOAT is an Epoxy based anti-corrosive coating designed for those surfaces, which requires protection against corrosion. Two components Resin and Hardener are mixed at the work site and applied to the prepared surface. EPICOAT is resistant to water, mild acids, alkalis, solvents, detergents, petrol, insecticides, salt, acidic fumes etc. It's film is tough and abrasion resistant and life of the treatment is longer than that of ordinary anti-corrosive paints.
EPICOAT is recommended for treating all types of surfaces e.g. iron, steel, concrete, wood etc, and is ideal for tanks, pipes, structural steel work, concrete structures etc., which require protection against corrosion. The above treated surface is resistant to the above Chemicals.
It is a brush or spray applied membrane-curing compound, which eliminates subsequent watering of concrete or plastered surfaces.
Concure will prevent quick drying of concrete and stop the evaporation of water from the surface. The water retention will be
around 80%.
Concure is used on bridges, dams, canal linings reservoirs, concrete floor / roads, airfield, retaining walls, the pre-stressed / precast concrete components, structural
patchwork repairs etc.
Conventional mould releasing oil-which are some times burnt used oil does not give smooth surface but it darkens the concrete
surface .Easy Mould is a specially formulated Liquid that could be diluted with water. The Liquid chemical reacts with alkali
contained in cement that forms a water repellant film not allowing the concrete to stick to the form work giving a smooth
exposed concrete without any honey combing or pinholes
Easy Mould is used on all type of form works steel, wood, plastic, fiberglass etc in casting RCC as well as mfg. Precast / Pre-stressed concrete.