:: WATERPROOFING COMPOUND
>> CONCOOL (Heat Insulation/ waterproofing Coating on PU based)
A single component ready to use heat Insulation coating to be applied on exterior surfaces like Roof, RCC Structure, GI / AC Sheet Roof, Plastic water Tank etc. CONCOOL helps to reduce the inside temperature by 10-15%. It has got UV resistant / Flexible properties. It makes the surface waterproof.
>> DAMPSEAL (Water based Silicon coating)
It is colourless silane / siloxane based water repellent coating for exterior walls plastered, exposed bricks, RCC/Stone facial, Old Heritage lime-finished Structure. It allows the masonry to breathe. Available in water & solvent based grade.
FEW HIGHLIGHTS:
- One application does the job.
- Invisible – preserves natural beauty of masonry.
- Sheds soot, grime, dirt & water.
- Penetrates deep into masonry.
- Becomes part of the surface, not just a surface coating.
- Allows masonry to breathe.
- Impervious to oxidation.
- Saves interior decoration by eliminating wet walls.
- Easy to apply.
- Inexpensive – long lasting.
>> DAMPSEAL-S (Solvent based Silicon coating)
Dampseal-s is a solvent-based silane /Siloxane water repellents used for impregnating and priming mineral and highly alkaline substrates. DAMPSEAL-S is suitable for concrete, mineral plasters, cement fiber boards, brick walls, masonry, cement rendering, foamed concrete, natural and artificial stones, sand, lime, brick work, etc.
>> DAMPSEAL-OS (Oil repellant Silicon Coating)
DAMPSEAL-OS is a solvent-based mixture of silane, siloxane and synthetic resins. In diluted form, it serves to render inorganic substrates such as mineral construction materials water-repellent and oil-repellent. Unlike conventional impregnating agents, which display only a hydrophobic, i. e. water-repellent, effect, DAMPSEAL-OS also exhibits an oleophobic, i. e. oil repellent, effect.
>> EPIWELD-W (Water based Epoxy concrete additive)
EPIWELD-W is two-component water based epoxy compound. It is used for waterproofing masonry walls, toilet sunk, water tanks, swimming pool, basement walls etc. It has water & chemical resistance properties as well as non-inflammable. It could be applied on a wet surface.
>> HYDROSHIELD® (Plastering mortar admixture)
It is a cement admixture to be used in the plastering mortar for providing IPS/plaster fillets in the water retaining structures such as water tanks, effluent treatment plants, toilet sunk, basements, garden terrace, etc. Hydroshield® has been tested by I.I.T Mumbai as per IS 2645-1975.
FEW HIGHLIGHTS:
- Withstands high water pressure
- Easy to use.
- High adhesive power to concrete and masonry surfaces.
- High abrasion resistance.
- Can be applied on both - wet and dry surfaces.
- Non-toxic.
- Cost effective.
- Effective on negative side of the structure also.
- Increases the strength of the mortar.
- Treatment becomes part of the surface.
- Resists extreme hydrostatic pressure on negative or positive side.
- Non hydrophobic.
- Reduces efflorescence.
>> KWICKROCK (Cement additive for stooping instant leakage)
KWICK ROCK is a quick setting liquid additive to cement used to stop streams of running water or seepage through masonry walls and floors immediately.
>> PAINT STICK (Stops Paint peeling)
It stops the failure of pint due to presence of efflorescence .The chemicals of paint Stick reacts with salt & make the surface hard on the treated surface .A putty prepared by mixing paint stick & cement ,level the surface & form hard base for paint
>> RUFCOAT® (Polymer based cementitious waterproofing coating)
It is a few component polymer based cementitious flexible waterproofing coating system for the roof having Tiled/IPS finish, Exterior walls, Water tanks as well as filling up the cracks.
RUFCOAT is supplied in two units: RUFCOAT Polymer-based Liquid & Repellow cementitious powder in grey or white colour. These two units are mixed along with water at site as specified and the prepared paint is applied with brush to make them waterproof.
Advantage of the Treatment:
- Ready to Use, easy to apply. * Light weight.
- High adhesive power to all types of surfaces. * Non-toxic
- Good flexibility. * Cost effective.
- High abrasion & U/V resis tance. * Good Chemical resistance.
- Can be applied even on a wet surface. * No curing required.
>> REPELLOW (Concrete waterproofing admixture)
It is a integral waterproofing plasticizing Liquid admixture for cement it reduces the porosity of concrete & increase it strength .Repellow is usefull in the plastering mortar as well as concrete in the construction of basement, water tank, Swimming pool, water Treatment plant etc...
>> RUFFERSEAL (Bituminous waterproof compound for AC&GI Roof)
Bituminous based waterproofing compound available in Liquid & Paste form, for stopping the water leaking from R.C.C., A.C. / G.I. Sheet Roof.